331
PRO Series Live Audio Systems
Owner’s Manual
Chapter 32: GUI Menu
The GUI is a very powerful multi-functional tool that forms the core of the PRO Series
Control Centre. It gives you total control and monitoring of the operating environment,
enhances control surface operation (you can even operate the PRO Series by GUI-only)
and allows the use of internal and external devices. To facilitate this the GUI
incorporates a simple-to-use GUI menu.
The GUI menu presents you with a list of options from which to choose, depending on
your requirement. The following lists some of the functions that the GUI menu
provides:
• Configuration Configure the routing, associations and the names and colours of
channels, groups, graphic EQs and internal effects, set up for multi-console
operation, set up the connected devices etc.
• Navigation Select the channels, buses and groups you want, go quickly to a GUI
screen display, go to recently opened screens, move through the scenes in a show
and go to the patching screens you want.
• Management Manage show files (internal and external), automation and the
monitoring system.
• User and operating preferences Adjust GUI screen brightness and contrast,
select delay compensation, select fader flip etc.
• Information View current software information.
• Overcoming a faulty GUI screen Should a GUI screen fail, you can re-map it to
a different bay.
• Diagnostics Check at-a-glance how your system is performing.
• Security Lock the screens to prevent unauthorised access.
• Shutdown sequence Shut down the control centre properly.
• Upgrading the software Install the very latest version (or any previous version)
of PRO Series software.
For details of how to use the GUI menu, see “Using the GUI menu” on page 56.
To Next Page
Loading...
Need help?
General
