Linking the master channels 129
PRO Series Live Audio Systems
Owner’s Manual
Linking the master channels
You can link the left, right and centre master channels in a two-way link (left and right)
or even a three-way link (left, centre and right), both of which use the linking
parameters set for the left master channel.
>> To link the left and right master channels
1 In the left master channel (control surface), press its quick access button (just
above the fader) to select it.
2 Set the stereo linking options for the left master channel, see “To set the stereo
linking options for a channel pair” on page 128. These settings will apply to the
linked stereo pair.
3 Click LNK.
>> To create a three-way master channel link
The centre channel can only be linked to a left/right master pair. If necessary, link the
left/right master channels (as detailed above). Then, click LNK in the configuration
processing area of the mono master channel.
To Next Page
Loading...
