Midas PRO SERIES User Manual

469
PRO Series Live Audio Systems
Owner’s Manual
Appendix M: Parameters Protected By
Safes
This appendix shows the parameters affected by each of the safe types (EQ, DYN,
MIC, AUTO, MUTE and FADER).
The parameter areas for the scopes (store and recall) and the safes are, basically the
same. However, the way they are presented in their respective appendices is different.
This may provide you with a useful alternative when referring to this material, should
you prefer one more than the other (see Appendix K "Parameters Affected By Scope" on
page 421).
Note: Some of the GUI displays in this appendix may look slightly different to the ones
on the PRO Series Control Centre you are using, as they may be taken from a different
type of PRO Series Live Audio System. For example, the PRO3 doesn’t have a
Matrix 9 - 16 section in the GUI channel strip. However, all of the parameters
protected by the safes still apply.
Overview
The following table provides a quick reference for finding the channel/group safe areas
in this appendix.
Channel
or Group
EQ safe DYN safe MIC safe AUTO safe MUTE safe FADER
safe
Input
channel
“EQ safe”
on
page 472
“DYN
(dynamic)
safe” on
page 473
“MIC safe”
on
page 475
“AUTO
(automatio
n) safe” on
page 476
“MUTE
safe” on
page 476
“FADER
safe” on
page 477
Aux “EQ safe”
on
page 480
“DYN
(dynamic)
safe” on
page 482
“MIC safe”
on
page 483
“AUTO
(automatio
n) safe” on
page 483
“MUTE
safe” on
page 484
“FADER
safe” on
page 485
Return N/A N/A “MIC safe”
on
page 488
“AUTO
(automatio
n) safe” on
page 489
“MUTE
safe” on
page 489
“FADER
safe” on
page 490
Matrix “EQ safe”
on
page 493
“DYN
(dynamic)
safe” on
page 495
“MIC safe”
on
page 496
“AUTO
(automatio
n) safe” on
page 496
“MUTE
safe” on
page 497
“FADER
safe” on
page 498
Master “EQ safe”
on
page 501
“DYN
(dynamic)
safe” on
page 503
“MIC safe”
on
page 504
“AUTO
(automatio
n) safe” on
page 504
“MUTE
safe” on
page 505
“FADER
safe” on
page 506
VCA group N/A N/A N/A “Automatio
n safe” on
page 508
“Mute
(MTE) safe”
on
page 509
“Fader
(FDR) safe”
on
page 510

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point