240 Chapter 25: File Management
PRO Series Live Audio Systems
Owner’s Manual
>> To open the Files screen
To open the Files screen, do one of the following:
• At a GUI screen, choose home
Files.
• In the primary navigation zone, press the automation/filing screen access button
twice.
7 Memory usage bar The number on the right shows the total amount
of storage space, or memory, available on the
storage media of the control surface. The number
on the left shows how much memory has been
used, indicated by a green bar.
8 DELETE button Deletes the selected file in its respective panel.
9 RENAME button Lets you rename the selected file in its respective
panel.
10 COPY button Lets you copy the selected file into its respective
panel.
11 File information row Gives information on a single file, such as name,
size, date of creation and type.
12 Lists of loaded files Shows all the files on the PRO Series Control
Centre and the removable storage device.
13 IMPORT button Copies selected file(s) from the Removable
Storage panel to the Control Surface panel, that
is, from the removable storage media to the PRO
Series Control Centre.
14 EXPORT button Copies selected file(s) from the Control Surface
panel to the Removable Storage panel, that is,
from the PRO Series Control Centre to the
removable storage media.
15 Status bar Displays operation status information.
16 FILE SYNC button Opens the Master Controller File
Synchronisation window (see “About the Master
Controller File Synchronisation window” on
page 241). This button is normally blue, but turns
red when the master controllers are not
synchronised.
17 LOAD button Loads the selected file in the Control Surface
panel.
Item Element Description
To Next Page
Loading...
Need help?
General
