Mindray ePM 12MC User Manual

20 - 8
20.9.1 Entering the BIS Expand View
To enter the BIS expanded view, follow this procedure:
1. Select the BIS numeric area or waveform area to enter the BIS menu.
2. Select BIS Expand at the bottom left corner to enter the BIS Expand View.
20.9.2 Selecting BIS Expand View Display
To select how the BIS Expand View display, follow this procedure:
1. Select the BIS numeric area or waveform area to enter the BIS menu.
2. Select BIS Expand at the bottom left corner to enter the BIS Expand View.
3. Select the EEG, BIS Trend or DSA tab.
20.9.2.1 Displaying the EEG waveforms
The EEG tab of the BIS Expand view shows the selected EEG waveforms. You can configure the EEG waveforms:
■ Select EEG Waveforms to set which EEG waveforms you want to display.
■ Select Scale to set EEG waveform scale.
■ Select Speed to set EEG waveform speed.
20.9.2.2 Displaying the BIS Trend
The BIS Trend tab of the BIS Expand view shows the trend of selected parameters. You can configure the BIS
trend:
■ Select Parameter 1 and Parameter 2 to set the parameters whose trend you want to display.
■ Set Trend Length.
20.9.2.3 Displaying BIS DSA
The Density Spectral Array (DSA) shows changes in the power spectrum distribution over a certain period of
time.
DSA view shows the following information:
■ y-axis: time scale
■ x-axis: signal frequency scale from 0 to 30 Hz
■ Color bar: shows range of power. Red indicates maximum power and blue indicates minimum power.
■ Spectral edge frequency (SEF) trend: It is the white Spectral Edge line superimposed on the graph where
95% of the total power lies on one side of the line (toward the inside of the graph) and 5% lies on the other.
■ The current SEF value: displays above the graph.

Mindray ePM 12MC Specifications

General

Brand	Mindray
Model	ePM 12MC
Category	Medical Equipment
Language	English