27 - 18
27.16.4 The Central Station Setup Tab
27.16.5 The Device Discover Tab
Multicast helps device discovery between monitors and between monitors and CMS. Devices in the same
multicast group can be mutually discovered.
WLAN IP Obtain IP Address
Automatically
On Selects whether to enable the function of
automatically getting the IP address.
Use the Following
Address
Off Select whether inputting the
IP Address, Subnet
Mask
, and Gateway is required.
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
Obtain DNS address
automatically
On Selects whether to enable the function of
automatically getting the DNS address.
Using the Following
DNS Address
Off Select whether inputting the IP address of
Preferred DNS Server and Alternate DNS
Server
is required.
Preferred DNS
Server
0.0.0.0
Alternate DNS
Server
0.0.0.0
WLAN Setup WLAN Band Auto
Auto: automatically identifies the WLAN band.
2.4G Channel All Selects the 2.4G channels.
5G Channel All Selects the 5G channels.
Network Test / Tests whether the wireless network is properly
connected.
Certificate
Management
Local /
Delete: delete the selected certifications.
USB Drive / Select certifications you want to import from the
USB memory, and then select
Import: import the
desired certifications from the USB memory.
Menu Item Default Setting Description
Menu Item Default Setting Description
Select CMS Off Selects whether you can select a CMS for your
monitor.
Add Central Station / Inputs the CMS name and IP address.
Menu Item Default Setting Description
Multicast TTL 1 /
Multicast Address 225.0.0.8
Master Server Address / /
Master Server IP Address 0.0.0.0
Connected Status Disconnected
Network Test / Tests whether the master server is properly
connected.
To Next Page
Loading...
Need help?
General
