6 - 3
6.7 Transferring a Configuration
When installing several monitors with identical user configurations, it is not necessary to set each unit
separately. Use a USB drive to transfer the configuration from monitor to monitor.
6.7.1 Exporting a Configuration
To export the current monitor’s configuration, follow this procedure:
1. connect the USB drive to the monitor’s USB connector.
2. Select the Main Menu quick key → from the Configuration column select Manage → input the required
password → select .
3. Select Export Configuration.
4. Select the configurations and User Maintenance Settings to export.
5. Select Export.
6.7.2 Importing a Configuration
To import the configuration from the USB drive to the monitor, follow this procedure:
1. Connect the USB drive to the monitor’s USB port.
2. Select the Main Menu quick key → from the Configuration column select Manage → input the required
password → select .
3. Select Import Configuration.
4. Select the configurations and User Maintenance Settings to import.
5. Select Import.
6.8 Printing Configurations
To print factory configurations and user configurations, follow this procedure:
1. Select the Main Menu quick key → from the Configuration column select Manage → input the required
password → select .
2. Select Print Configuration.
3. Select desired configurations.
4. Select Print.
6.9 Loading a Configuration
You may make changes to some settings during operation. However, these changes or the pre-selected
configuration may not be appropriate for the newly admitted patient. Therefore, the monitor allows you to load
a desired configuration to ensure that all the settings are appropriate for your patient.
To load a configuration, follow this procedure:
1. Select the Main Menu quick key → from the Configuration column select Load.
2. Select the desired configuration.
â—† Select the configuration on this monitor in the Local page.
â—† Select the configuration on the USB drive in the USB Drive page.
3. Select Load.
• The monitor may configure some settings by default when you load a configuration of different
software version with the current configuration.
To Next Page
Loading...
Need help?
General
