A - 7
A.12 Wi-Fi Specifications
A.12.1 Wi-Fi Technical Specifications (MSD45N)
A.12.2 Wi-Fi Technical Specifications (SX-SDMAC-2832S+)
Protocol IEEE 802.11a/b/g/n
Modulation mode BPSK, QPSK, 16QAM, 64QAM
Operating frequency 2.4 GHz to 2.495GHz
5.15 GHz to 5.25 GHz, 5.725 GHz to 5.85 GHz
Channel spacing IEEE 802.11b/g: 5 MHz
IEEE 802.11n (at 2.4 G): 5 MHz
IEEE802.11a: 20 MHz
IEEE802.11n (at 5 G): 20 MHz
Wireless baud rate IEEE 802.11b: 1 Mbps to 11 Mbps
IEEE 802.11g: 6 Mbps to 54 Mbps
IEEE 802.11n: 6.5 Mbps to 72.2 Mbps (MCS0-MCS7)
IEEE 802.11a: 6 Mbps to 54 Mbps
Output power <20dBm (CE requirement, detection mode: RMS)
<30dBm (FCC requirement: detection mode: peak power)
Operating mode As station, access AP for data transmission
Data security Standards: WPA-PSK, WPA2-PSK, WPA-Enterprise,WPA2-Enterprise
EAP method: EAP-FAST, EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP- MSCHAPv2,
PEAP-TLS, LEAP
Encryption: TKIP, AES
Protocol IEEE 802.11a/b/g/n
Modulation mode BPSK, QPSK, 16QAM, 64QAM
Operating frequency 2412 MHz to 2472 MHz
5180 MHz to 5320 MHz, 5500 MHz to 5700 MHz, 5745 MHz to 5825 MHz
WARNIGN: SX-SDMAC-2832S+ supports the DFS channels. When using
the DFS channels, Wi-Fi performance stability and roaming time can be
undermined due to avoiding interfering with Radar systems. DFS
channels are disabled by default and not recommended. The operator
should comprehensively assess the risk before using the DFS channels.
Channel spacing IEEE 802.11b/g: 5 MHz
IEEE 802.11n (at 2.4 GHz): 5 MHz
IEEE802.11a: 20 MHz
IEEE802.11n (at 5 GHz): 20 MHz
Wireless data rate IEEE 802.11b: 1 Mbps to 11 Mbps
IEEE 802.11g: 6 Mbps to 54 Mbps
IEEE 802.11n: MCS0 - MCS7
IEEE 802.11a: 6 Mbps to 54 Mbps
Output power <20 dBm (CE requirements, detection mode: RMS)
<30 dBm (FCC requirements, detection mode: peak power)
Operating mode As station, access AP for data transmission
Data security Standards: WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
EAP method: EAP-FAST, EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2,
PEAP-TLS, LEAP
Encryption: TKIP, AES