Mindray ePM 12MC - Display Specifications; Recorder Specifications

A - 4
A.5 Display Specifications
A.6 Recorder Specifications
Run time Model ePM 12M/ePM 12MA/ePM
12MC
ePM 10M/ePM 10MA/
ePM 10MC
Battery LI13I001A
(one battery
connected)
≥ 2 hours ≥ 2 hours
Battery LI23S002A
(one battery
connected)
≥ 4 hours ≥ 4 hours
Battery LI23I003A
(one battery
connected)
≥ 4.5 hours ≥ 6 hours
Battery LI23I003A
(two batteries
connected)
≥ 9 hours /
when the monitor is powered by a new fully-charged battery at 25 ºC±5 ºC
with 5-lead ECG and SpO
2
cable connected, auto NIBP measurements at an
interval of 15 minutes, and screen brightness set to 1.
Shutdown delay: at least 15 minutes after the low battery alarm first occurs.
Charge time Battery LI13I001A
(one battery
connected)
• No more than 2.5 hours to 90% when the monitor
is off
• No more than 5 hours to 90% when the monitor is
on
Battery LI23S002A
(one battery
connected)
• No more than 5 hours to 90% when the monitor is
off
• No more than 10 hours to 90% when the monitor
is on
Battery LI23I003A
(one battery
connected)
• No more than 5 hours to 90% when the monitor is
off
• No more than 10 hours to 90% when the monitor
is on
Battery LI23I003A
(two batteries
connected)
• No more than 10 hours to 90% when the monitor
is off
• No more than 20 hours to 90% when the monitor
is on
Screen type Capacitive, multi-point color touchscreen
Screen Size (diagonal) ePM 10M/ePM
10MA/ePM 10MC:
10.1 inches
ePM 12M/ePM
12MA/ePM 12MC:
12.1 inches
Resolution ePM 10M/ePM
10MA/ePM 10MC:
1280 x 800 pixels
ePM 12M/ePM
12MA/ePM 12MC:
1280 x 800 pixels
Method Thermal dot array
Horizontal resolution 16 dots/mm (25 mm/s paper speed)
Vertical resolution 8 dots/mm