Minebea Intec PR5900 - Page 224

Weighing point C @admin
Weighing point not assigned
Save
Not assigned
Internal weighing point
Liquid counter
User scale
xBPI scale
SBI scale
Pendeo Truck
Pendeo Process
PR-Net weighing point
Mettler-Scale
SMA scale
4.7.11.1 Interface (serial)
In this menu item, the parameters of the serial interface for the SMA scale weighing
electronics are congured.
Accessible via MENU - [Operating] - [System setup] - [Weighing points] - [Weighing
point x] - [Interface] .
WP-C Max -------?? d= -------??
no values from scale
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
SMA scale
Pendeo Truck
Parameters
1. Conrm [Weighing point].
A selection window opens.
2. Select and conrm [SMA scale].
3. Press the [Save] soft key to save the settings.
WP-C Max -------?? d= -------??
no values from scale
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
SMA scale
Pendeo Truck
Parameters
The weighing electronics are now assigned to the weighing point.
1. In this case: Select and conrm [Weighing point C] with [SMA scale].
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-222