Minebea Intec PR5900 - 6 System Maintenance

6 System maintenance
NOTICE
Incorrect operation can cause data loss.
Data transfer may only be carried out by authorized specialist personnel.
In the system maintenance menu (under System menu), the system maintenance
parameters are congured.
- [Backup], see Chapter 6.1.
- [Restore], see Chapter 6.2.
- [Export], see Chapter 6.3.
- [Import], see Chapter 6.4.
- [Alibi memory maintenance], see Chapter 6.5.
- [SD card maintenance], see Chapter 6.6.
- [Create service report], see Chapter 6.7.
- [Shutdown & Power o] (switch o device), see Chapter 6.8.
- [Update software], see Chapter 6.9.
- [Factory reset], see Chapter 6.10.
- [Test hardware], see Chapter 6.11.
Accessible via MENU - [Operation]- [System maintenance] .
Operating @admin
Application menu
Weighing
Check weighing
Device employed as terminal
Configuration
System menu
System setup
System information
System maintenance
Logout
Select and conrm [System maintenance].
The system maintenance menu is displayed.
6 System maintenance Process Controller Maxxis 5 PR 5900
EN-263 Minebea Intec