Minebea Intec PR5900 - Show Pendeo Data

5.8 Show Pendeo data
In this menu item (under System information), information on the Pendeo load cells is
displayed.
Accessible via MENU - [Operating] - [System information]- [Show Pendeo data] .
System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
Pendeo data @admin
Show weighing point D
Show load cell weight @admin
Zero correction
Communication error count
LC 1
LC 2
LC 3
LC 4
101
102
103
104
1.430 t
2.364 t
1.600 t
2.109 t
0.00000 t
8
Info by name
2. Press EXIT to return to the previous window.
1. Select and conrm [Show Pendeo data]
A selection window opens.
2. Select and conrm the desired weighing point.
An information window is displayed.
5 System information Process Controller Maxxis 5 PR 5900
EN-257 Minebea Intec