Minebea Intec PR5900 - Application License

4.9.1 Application license
In this menu item (under License settings), the application license is activated.
Accessible via MENU - [Operating] - [System setup] - [License settings] - [Application
license] .
License settings @admin
1
2
3
Board number
Alibi license
OPC server license
Dosing license
Application license
141825064
Default Demo mode Save
The nine‑digit board number is displayed.
Note:
License numbers are delivered with the device as a certicate and are valid only for
this device/board number.
4.9.2 Demo mode
In this menu item (under License settings), licenses for functions and application
programs are activated for demo mode.
Accessible via MENU - [Operating] - [System setup]- [License settings]- [Demo mode] .
License settings @admin
Board number
Alibi license
OPC server license
Dosing license
Application license
141825064
Default Demo mode Save
1. Select [Application license] and enter the license number as a seven‑digit gure using
the keyboard.
2. Press the [Save] soft key to save the settings.
1. Press the [Demo mode] soft key to operate the selected application in demo mode.
A prompt window appears.
4 System setup Process Controller Maxxis 5 PR 5900
EN-227 Minebea Intec