Minebea Intec PR5900 - Page 230

License settings @admin
1
2
3
Board number
Alibi license
OPC server license
Dosing license
Application license
141825064
Default Demo mode Save
?
WARNING!
When demo mode is enabled,
> The device is restarted every 4 hours.
> The database is cleared on restart.
> The Import/Export and Backup/Restore
functions are disabled.
> The activated licences will be reset
to demo mode.
Cancel Continue
License settings @admin
1
2
3
Board number
Alibi license
OPC server license
Dosing license
Application license
0
9546082
-Mode active ... Coldstart
Default Save
Product License number Description
PR 5900/91 1550459 Alibi memory license
PR 5900/92 3550167 OPC server license
PR 5900/93 9546082 Dosing license
PR 5900/xx 1786623 Universal license
PR 5900/81 0928277 Phase license
PR 5900/82 6955306 Count license
PR 5900/83 7961243 Batching license
PR 5900/84 0661176 Truck license
PR 5900/86 8965110 IBC license
PR 5900/87 8395383 Basic tilt error license
2. Press the [Continue] soft key to start demo mode.
indicating that a cold start will occur; see Chapter 2.2.3.
A notication window appears
3. If demo mode is activated, the corresponding license number (here: example for
batching) must be input and conrmed with the [Save] soft key.
4. The desired batching is carried out.
5. To end demo mode, press the [Finish demo] soft key.
The previously entered license number for demo mode is deleted.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-228