Minebea Intec PR5900 - Alibi Memory Management

WP-A Max 3000kg
N
g
0g 3000g
Login
1
2
3
Password recovery dialog
These are the values for unlocking the password:
Device boardnumber
Unlock query
Valid until
Please mail ALL values to <help@minebea-intec.com>
to receive the unlock answer
Unlock answer
354942727
2211871966
2017-11-24-14:40:08
0
i
Password has been unlocked.
You should NOW enter a new admin password!
Continue
4.11 Alibi memory
In this menu item (under System setup), the parameters for the conditions for a full Alibi
memory are congured.
- [Tidy up records] (conditions for automatic overwrite), see Chapter 4.11.1.
- [Delete] (complete Alibi memory), see Chapter 4.11.2.
Note:
A license is required for this function; see Chapter 4.9.
If CAL switch 1 is closed or if the parameters [W&M] and [Settings locked] are set for a
weighing point, the Alibi memory cannot be deleted and the settings are not changed.
The Alibi memory must be set before verifying the weighing points!
Accessible via MENU - [Operating]- [System setup]- [Alibi memory] .
System setup @admin
Connected devices
Date & Time
Operating parameters
Network parameters
Network share connections
Fieldbus parameters
Weighing points
Display settings
License settings
User management
Alibi memory
3. Enter the 10-digit number sequence in the "Unlock answer" eld in the password
unlock window and conrm.
The following window opens:
4. Change the administrator password, see Chapter 4.10.3.
Select and conrm [Alibi memory].
The Alibi memory menu is displayed.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-240