Minebea Intec PR5900 - Copy User

Create user @admin
User ID
User name
Application rights
Operator
Head of department
Administrator
13
operator01
Save
Operator is authorized
to chang application settings
and job specific data.
Sample application rights:
Note:
See corresponding application manual.
[Operator]
User is permitted to start weighing and change order-specic data.
[Supervisor]
User is permitted to change application settings and order-specic data.
[Administrator]
User is permitted to change rmware/application settings and order-specic data.
[Simulation]
User is permitted to simulate tipping error correction.
4.10.2 Copy user
In this menu item (under User management), one or more users are created with the
same rights.
Accessible via MENU - [Operating]- [System setup]- [User management]- [Copy user] .
User management @admin
Create user
Copy user
Change user settings
Remove user
Deactivate user management
5. Press the [Save] soft key to save the settings.
1. Select and conrm [Copy user].
A selection window opens.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-234