Minebea Intec PR5900 - Show Version

5.1 Show version
In this menu item (under System information), information on the version numbers and
creation date is displayed.
Accessible via MENU - [Operating] - [System information]- [Show version] .
System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
Version @admin
Maxxis 5
Bios
Firmware
Basic
Board number
Remote terminal
Device is not connected
Rel. 02.10.03.205503 2014-03-11-12:33
Rel. 02.10.03.205502 2014-03-11-12:29
Rel. 01.00.02.161 2014-02-06-11:57
3549422727
Maxxis 5
[Bios]
Version number and BIOS creation date
[Firmware]
Version number and rmware creation date
[Basic]
The corresponding application name, version number and creation date of the
application is displayed here
[Board number]
Nine-digit board number
Remote terminal
In this case: Device is oine
1. Conrm [Show version].
The following information is displayed.
2. Press EXIT to return to the previous window.
5 System information Process Controller Maxxis 5 PR 5900
EN-245 Minebea Intec