Minebea Intec PR5900 - Selecting the Operating Language; System Menu

Note:
User management can be activated optionally. However, it is not required for normal
operation.
During system installation and set-up, we recommend leaving user management
deactivated. This facilitates access to the various menus and to the website.
User management should usually be activated if:
- several people work with the device or have access to it.
- the aim is to prevent unauthorized people from making changes to the device or
from inuencing the processes controlled by the device.
3.3 Selecting the operating language
Factory settings: system language = operating language (display language)
The operating language can be changed as follows:
- Select and conrm the desired language in the menu [Operating]- [System setup]-
[Operating parameters]- [Display language] . Save the change using the [Save] soft
key, see also Chapter 4.3.
- Select and conrm in the menu [Operating]- [System setup]- [User management]-
[Create/copy/modify user]- [ Language] . Save the change using the [Save] soft key,
see also Chapter 4.10.1.
- With the function keys F1 and F2, if a key has been assigned to [Change language] in
the menu [Operating]- [System setup]- [Operating parameters]- [F1/F2 key] , see
Chapter 4.3. The operating language can be changed from any menu.
Note:
When user management is activated, the operating language only changes once the
currently logged-in user logs out. It is only possible to switch languages immediately
using the F1 or F2 key.
3.4 System menu
Under System menu in the Operating menu, the process controller is set up, information
is accessed and the system is managed.
Note:
The menu items under Application menu depend on the application in question and are
described in a separate operating manual.
Accessible via MENU key - [Operating].
Process Controller Maxxis 5 PR 5900 3 Operation and control
Minebea Intec EN-34