Minebea Intec PR5900 - Backup

6.1 Backup
In this menu item (under System maintenance), the current conguration and/or
database of the device is saved as a backup to connected storage media or in enabled
directories.
- [SD card], see Chapter 6.1.1.
- [USB stick], see Chapter 6.1.2.
- Shared directory (under Network share connections), see Chapter 6.1.3.
A backup can be performed for the following reasons:
- The current data is needed on another device.
- The conguration data is to be archived centrally.
- The conguration and/or database might be deleted accidentally.
- The conguration might be changed inadvertently.
The saved data can be restored later.
The backup stores the records in a format that can only be restored via the [Restore]
function.
Note:
If the EXIT button is pressed while the backup is being created, all created les are
deleted.
Accessible via MENU - [Operating]- [System maintenance]- [Backup] .
System maintenance @admin
Backup
Restore
Export
Import
Alibi memory maintenance
SD card maintenance
Create service report
Shutdown & Power off
Update software
Factory reset
Test hardware
Note:
When user management is activated, the logged in user must have rights for the
following:
- Complete system maintenance,
- Importing (importing and restoring), and
- Exporting (exporting and saving).
Process Controller Maxxis 5 PR 5900 6 System maintenance
Minebea Intec EN-264