Minebea Intec PR5900 - Create User

4.10.1 Create user
In this menu item (under User management), new users are created and the
corresponding parameters are congured.
The users "admin" and "default" are created automatically and cannot be deleted:
- The "admin" user (Administrator) is always created with all rights authorized. These
cannot be restricted.
- The "default" user has restricted rights.
Accessible via MENU – [Operating] - [System setup] - [User management] - [Create user].
User management @admin
Create user
Copy user
Change user settings
Remove user
Deactivate user management
Create user @admin
Enter user name and password
User name
Password ********
ABC..
Note:
Special characters are not allowed.
Always follow the IT security guidelines.
Default settings: User name: admin, password: admin
1. Select and conrm [Create user].
An input window opens.
2. Enter the user name using the keyboard and conrm.
3. Enter a password (access code) using the keyboard and conrm.
A selection window opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-231 Minebea Intec