Minebea Intec PR5900 - User Management Functions

- [Remove user], see Chapter 4.10.4.
- [Deactivate user management], see Chapter 4.10.5.
Accessible via MENU – [Operating] - [System setup] - [User management].
System setup @admin
Connected devices
Date & Time
Operating parameters
Network parameters
Network share connections
Fieldbus parameters
Weighing points
Display settings
License settings
User management
Alibi memory
Activate user management:
User management
?
User management is not activated.
Activate user management?
Yes No
This prompt window only appears if user management is not activated.
Press the [Yes] soft key to activate user management.
[ ]Select and conrm [User management].
User management @admin
Create user
Copy user
Change user settings
Remove user
Deactivate user management
The user management menu opens.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-230