Minebea Intec PR5900 - Remove User

Select user @admin
Select user to change
admin
default
operator
If the changes are made by the user "admin", only one entry is required for changing
passwords.
Change user settings @admin
User ID
User name
User activated
Password
Language
Screensaver
Logout after
Force login after screensaver
Change user at relogin
Need password to logout
11
operator
********
System default
Standard system settings
no auto logout
Save
If the changes are made by another user, two entries are required for changing
passwords.
Change user settings @admin
User ID
User name
User activated
Old Password
New Password
Language
Screensaver
Logout after
Force login after screensaver
Change user at relogin
Need password to logout
11
operator
********
********
System default
Standard system settings
no auto logout
Save
4.10.4 Remove user
In this menu item (under User management), one or more users are removed/deleted
from user management.
2. Select and conrm the appropriate user.
3. Change the corresponding parameters; see also Chapter 4.10.1.
4. Press the [Save] soft key to save the changes.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-236