Minebea Intec PR5900 - Printer

[Data bits]
Groups of data bits.
Selection: 7 data bits, [8 data bits]
[EW-Com slave ID]
Input: Address from A to Z.
4.1.4 Printer
In this menu item (under Connected devices), the parameters for a printer are
congured.
- [Serial printer], see Chapter 4.1.4.1.
- [Network printer], see Chapter 4.1.4.2.
- [Network share connection] (shared directory), see Chapter 4.1.4.3.
- [USB printer], see Chapter 4.1.4.4.
- [USB folder], see Chapter 4.1.4.5.
Accessible via MENU - [Operating] - [System setup]- [Connected devices]- [Printer] .
Connected devices @admin
General devices
Remote display
ModBus-RTU master
PC via EW-Com
Printer
Remote terminal
Barcode scanner
Add. application devices
Ticket printer
Printer 2
Interface
(not assigned)
(Not assigned)
(Not assigned)
(Not assigned)
(C1/CX1)
(Remote terminal TTY)
Interface
(Network printer)
(Not assigned)
Printer @admin
Interface not assigned
Test print Save
5. Press the [Save] soft key to save the settings.
1. Select and conrm [Printer].
2. Select and conrm [Interface].
A selection window opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-63 Minebea Intec