Minebea Intec PR5900 - Page 71

Printer 2 @admin
Interface
Printer type
Selected USB printer
USB vendor
USB product
USB serial number
USB printer
raw
Zebra; LP2844 42A060400…
Zebra;
LP2844
42A060400476
Default Test print Save
Printer 2 @admin
Interface
Printer type
Selected USB printer
USB vendor
USB product
USB serial number
USB printer
raw
Zebra; LP2844 42A060400…
Zebra;
LP2844
42A060400476
Default Test print Save
Zebra; LP2844 42A060400476
Zebra Technologies ZTC GK420d 28J110200678
The connected printers (here: 2) can be selected.
4.1.4.5 USB folder
In this menu item (under Printer), the parameters for a folder on a connected USB stick as
a printer are congured.
Accessible via MENU - [Operating]- [System setup]- [Connected devices]- [Printer]-
[Interface]- [USB folder] .
3. Select and conrm [Selected USB printer].
A selection window opens.
4. Select and conrm the appropriate printer.
5. Press the [Test print] soft key.
A test page (see Chapter 10.2) is printed.
6. Check the printer settings and change if necessary.
7. Press the [Save] soft key to save the settings.
4 System setup Process Controller Maxxis 5 PR 5900
EN-69 Minebea Intec