Minebea Intec PR5900 - Page 70

4.1.4.4 USB printer
In this menu item (under Printer), the parameters for a printer at the USB interface are
congured.
Accessible via MENU - [Operating]- [System setup]- [Connected devices]- [Printer]-
[Interface]- [USB printer] .
Printer @admin
Interface not assigned
Test print Save
Not assigned
Built-in RS-232
Built-in RS-485
Option-2 RS-485-A
Option-2 RS-485-B
Network printer
Network share connection
USB printer
USB folder
Printer @admin
Interface
Printer type
Selected USB printer
USB vendor
USB product
USB serial number
USB printer
raw
Zebra; LP2844 42A060400…
Zebra;
LP2844
42A060400476
Default Test print Save
Inactive parameters are grayed out.
[Printer type]
The printer type depends on the printer: raw, CR/LF translation, EPSON TM-U220,
EPSON LQ-300K, Generic PCL5 (Unicode), Generic PCL5 (codepage), Generic ESC/P2
1. Select and conrm [USB printer].
A selection window opens.
2. Select and conrm the individual parameters.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-68