Minebea Intec PR5900 - Show Modbus-TCP I;O Module

Note:
Option cards not recognized by the system are displayed as follows:
PR xxxx/xx, unsupported option
Option cards detected by the system but not recognized by it are displayed as
follows:
Information could not be read -assigned-
Built-in @admin
Option type
Serial number
Production date
Production location
PR5900/00 Rev 99
1011-104711-000123
01.01.0000
SAG-HH
Built-in @admin
RS-232
Status
Tx character in bytes
Rx character in bytes
Breaks
Overrun errors
Parity errors
Framing errors
is in use
14295375
275
273
0
2
0
RS-232 RS-485
5.5 Show ModBus-TCP I/O module
In this menu item (under System information), the I/O modules of a ModBus-TCP master
of an active application are monitored.
Accessible via MENU - [Operating] - [System information] - [Show ModBus-TCP IO
module] .
2. Select option and press the [Info] soft key.
Information on the option card is displayed.
3. Press EXIT to return to the previous window.
4. Press the [Monitor] soft key.
The current values are display, e.g., internal RS-232 interface.
5. Press the [RS-485] soft key to display the current values for the internal RS-485
interface.
6. Press EXIT to return to the previous window.
5 System information Process Controller Maxxis 5 PR 5900
EN-249 Minebea Intec