Minebea Intec PR5900 - Page 252

System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
System information @admin
1
2
3
4
5
6
7
8
Phoenix Module 1
Phoenix Module 2
Phoenix Module 3
Phoenix Module 4
Phoenix Module 5
Phoenix Module 6
Phoenix Module 7
Phoenix Module 8
Not linked
Not linked
Not linked
Not linked
Not linked
Not linked
I/O data active
Not linked
ModBus-TCP Master @admin
Phoenix Module 7
I/O data active
connection counter
I/O cycles
cycle time
Rd
Wr
HREGS 8000:
HREGS 8001:
172.24.22.7
13.09.2013-14:26:15
42
368
0.055 s
0000
0000 0000 0000 0000
[Phoenix Module 7]
IP address
[I/O data active since]
Date and time connection last made
[Connection counter]
Counts every connection.
1. Select and conrm [Show ModBus-TCP IO module].
The modules and their status are displayed.
2. Select and conrm the corresponding module.
The following information is displayed.
Process Controller Maxxis 5 PR 5900 5 System information
Minebea Intec EN-250