Minebea Intec PR5900 - Change User Settings

Select user @admin
Select user to copy
admin
default
user01
4.10.3 Change user settings
In this menu item (under User management), the parameters for existing users are
changed.
Accessible via MENU - [Operating]- [System setup]- [User management]- [Change user
settings] .
User management @admin
Create user
Copy user
Change user settings
Remove user
Deactivate user management
2. Select and conrm the appropriate user.
An input window opens.
3. Enter user name and password and conrm, see also Chapter 4.10.1.
4. Change the user settings if necessary, see Chapter 4.10.3.
5. Press the [Save] soft key to save the settings.
1. Select and conrm [Change user settings].
A selection window opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-235 Minebea Intec