Minebea Intec PR5900 - Operating Parameters Setup

Barcode scanner @admin
Interface
Baudrate
Data bits
Parity
Stop bits
Remote terminal TTY
9600 baud
8 data bits
even parity
1 stop bit
Default Save
Inactive parameters are grayed out.
4.2 Date & time
In this menu item (under System setup), the parameters for the date & time are
congured.
Accessible via MENU - [Operating] - [System setup]- [Date & Time] .
System setup @admin
Connected devices
Date & Time
Operating parameters
Network parameters
Network share connections
Fieldbus parameters
Weighing points
Display settings
License settings
User management
Alibi memory
Date & Time @admin
Time zone
Local date
Local time
Clock source
Berlin, Germany
02-08.2012
12:17:24
Local hardware clock
Default Format Save
4. Press the [Save] soft key to save the settings.
1. Select and conrm [Date & Time].
A selection window opens.
2. Select the individual parameters and conrm.
4 System setup Process Controller Maxxis 5 PR 5900
EN-73 Minebea Intec