Minebea Intec PR5900 - Show Calibration Check Number

Status alibi memory @admin
Records stored
First record
Last record
Used memory
Estimated free records
Keep records for
Memory full at
Remaining days before full
Est. allowed records/day
2
27.08.2012-11:17:04
27.08.2012-11:22:10
0.00 %
183499
13 days
09.09.2012
13
14115.3
5.7 Show calibration check number
In this menu item (under System information), the calibration check numbers of the
individual weighing points are displayed.
Accessible via MENU – [Operating] - [System information] - [Show calibration check
number].
System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
Calibration check number @admin
Weighing point A
Last change
Calibration check number
Weighing point B
Last change
Calibration check number
Internal weighing point
18:07.2011 14:00:18
1343362078
Pendeo Truck
16:07.2011 16:06:36
1421463922
1. Select and conrm [Status Alibi memory].
The status information of the Alibi memory is displayed.
2. Press EXIT to return to the previous window.
1. Select and conrm [Show calibration check numbers].
The current check numbers of the weighing points are displayed.
Process Controller Maxxis 5 PR 5900 5 System information
Minebea Intec EN-256