Minebea Intec PR5900 - Network Share Connections Management

- resets the VNC password to [no password].
Note:
Blackbox device: DHCP is deactivated and the xed IP address 192.168.1.2 is set;
see also Chapter 2.8.2.
4.5 Network share connections
In this menu item (under System setup), the parameters for shared directories (network
share connections) are congured and made available for system maintenance (e.g.
storing/saving data on the network).
- [Add], see Chapter 4.5.1.
- [Change], see Chapter 4.5.2.
- [Remove], see Chapter 4.5.3.
The following order must be observed without exception:
- One or more directories on the server/notebook/PC must be shared; see the manual
for the operating system in question (e.g., Windows 7: click the directory, right-click
on [Advanced Sharing…] and activate [Share this folder]. Then click [OK].)
- In the menu [Operating]- [System setup]- [Network share connections] , congure
the connections to the shared directories on the server/notebook/PC.
Accessible via MENU - [Operating]- [System setup]- [Network share connections] .
System setup @admin
Connected devices
Date & Time
Operating parameters
Network parameters
Network share connections
Fieldbus parameters
Weighing points
Display settings
License settings
User management
Alibi memory
3. Press the [Save] soft key to save the settings.
Select and conrm [Network share connections].
The window listing the available network share connections opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-83 Minebea Intec