Minebea Intec PR5900 - User Logout; User Management

Note:
Default setting: User name: admin; password: admin
3.1.2 User Logout
In this menu item, the logged-in user is logged out.
Accessible via MENU - [Operation]- [Logout] .
Operating @admin
Application menu
Weighing
Check weighing
Device employed as terminal
Configuration
System menu
System setup
System information
System maintenance
Logout
The user who is currently logged in is shown in the top right-hand corner of the
display.
If a password is required to log out the user (option activated in the user settings, see
Chapter 4.10), the entry window appears accordingly.
3.2 User management
User management is deactivated by default, see Chapter 4.10.
By means of user management, access to various menu levels of the device can be
limited, if the necessity arises. This includes system setup, system maintenance, access
via the website and the various levels of the application (application-specic).
Operating @admin
Application menu
Weighing
Check weighing
Device employed as terminal
Configuration
System menu
System setup
System information
System maintenance
Logout
The Operating window appears.
1. Press the MENU key to switch to the operating menu.
2. Press the [Logout] soft key to log out the user who is currently logged in.
3 Operation and control Process Controller Maxxis 5 PR 5900
EN-33 Minebea Intec