Minebea Intec PR5900 - Browse Alibi Memory

[I/O cycles]
Counts every data exchange.
[Cycle time]
Indicates how often a data exchange takes place (here: every 0.055 s). The exchanged
data is shown on the following lines with the registration number.
5.6 Browsing the Alibi memory
In this menu item (under System information), the Alibi memory is searched.
The following options are available:
- [Search for specic date in Alibi memory], see Chapter 5.6.1.
- [Search for a given sequence number], see Chapter 5.6.2.
- [Status Alibi memory], see Chapter 5.6.3.
Accessible via MENU - [Operating]- [System information]- [Browse Alibi memory] .
System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
5.6.1 Search for specic date in Alibi memory
In this menu item (under Alibi memory), the Alibi memory is searched by a specic date.
Accessible via MENU - [Operating] - [System information]- [Browse Alibi memory]-
[Search for specic date in Alibi memory] .
3. Press EXIT to return to the previous window.
Select and conrm [Browse Alibi memory].
Alibi memory @admin
Search for specific date in alibi memory
Search for a given sequence number
Status alibi memory
The Alibi memory menu is displayed.
5 System information Process Controller Maxxis 5 PR 5900
EN-251 Minebea Intec