Minebea Intec PR5900 - Liquid Counter

WP-A Max 3000g d= 0.1g
30
–
g
Units @admin
Number of units
Unit 2
Unit 3
3 weight units
kg
basic accuracy
kg
Unchanged
Display accuracy
Display accuracy
Save
WP-A Max 3000g d= 0.1g
30
–
g
Units @admin
Number of units
Unit 2
Unit 3
3 weight units
ot
basic accuracy
lb
1 level lower
Display accuracy
Display accuracy
Save
Max = 3000g ~ 6.613868lb
e = 0.1g ~ 0.00022lb
d = 0.0005lb
[Unit x]
Selection: kg, t, lb, g, mg, oz
[Display resolution]
Selection: [same], 1 level lower, 2 level lower, 3 level lower, 3 level higher, 2 level
higher, 1 level higher
4.7.2 Liquid counter
In this menu item (under Weighing points), the weighing electronics of a liquid counter
are assigned to a logical weighing point and congured.
- [Parameters] (weighing electronics), see Chapter 4.7.2.1.
Liquid counters only aect the internal digital inputs.
- Input 1 = WP‑A
- Input 2 = WP‑B
- Input 3 = WP‑C
- Input 4 = WP‑D
The maximum frequency is 200 Hz at a duty ratio of 50:50.
The counter only counts up. "Set zero" resets it.
4. Select and conrm the individual parameters.
5. Press the [Save] soft key to save the settings.
4 System setup Process Controller Maxxis 5 PR 5900
EN-123 Minebea Intec