Minebea Intec PR5900 - Page 124

WP-A Max 3000g d= 0.1g
00
g
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Pendeo Truck
xBPI scale
User scale
Parameters Calib Units
WP-A Max 3000g d= 0.1g
30
–
g
Units @admin
Number of units 1 weight unit
Save
WP-A Max 3000g d= 0.1g
30
–
g
Units @admin
Number of units 1 weight unit
Save
1 weight unit
2 weight units
3 weight units
1. In this case: Select [Weighing point A] with [Internal weighing point] and press the
[Units] soft key to select further units and the associated display accuracy. In this
case: Select [Weighing point A] with [Internal weighing point] and press the [Units]
soft key to select further units and the associated display accuracy.
The following window opens:
2. Conrm the selection.
A selection window opens.
3. Select and conrm [3 weight units].
A selection window opens.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-122