Minebea Intec PR5900 - Loading Language Files; 3.10 BIOS BOOT Menu

This message appears if a CAL switch is closed and/or if [Operating] - [System setup] -
[Weighing points] - [Weighing point x] - [Parameters] - [Settings locked] is active.
3.9.13 Loading language les
In this web menu item, the language les are loaded onto the device.
Note:
This function allows translations to be tested during development. The les are only
available in the working memory and will be lost when the next cold start occurs.
For permanent storage, the language les must be loaded onto the device together
with the application in the menu [Operating] - [System maintenance] - [Update
software] (see Chapter 6.9).
Accessible via the web menu - [Upload Language Files].
3.10 BIOS BOOT menu
If the device cannot perform a normal system start, the BIOS BOOT menu must be used:
- Open BIOS BOOT menu, see Chapter 3.10.1.
- BIOS BOOT menu in blackbox device, see Chapter 3.10.2.
1. Click [Upload Language Files] in the web menu.
A selection window opens.
2. Click [Browse], select the corresponding "mo les," and click [upload] to load the les
onto the device.
3. Click the symbol to return to the web menu.
3 Operation and control Process Controller Maxxis 5 PR 5900
EN-47 Minebea Intec