Minebea Intec PR5900 - Page 48

Possible error messages, see Chapter 3.9.12.3
3.9.12.2 Restore
In this web menu item, the setup, user, calibration, and application data is restored on the
device.
Accessible via the web menu – [Backup and restore setup data] - [Restore].
Example: "InternetExplorer"
Possible error messages, see Chapter 3.9.12.3
3.9.12.3 Error messages
In the web menu item Backup/Restore, the following error messages may appear when
backing up or restoring the setup data:
This message appears if the user is not logged out.
1. Click [Browse] to select an XML le for restoring.
The le upload window of the Internet browser appears.
2. Select the XML le (e.g. setup-PR5900 27FF07-20130729-082010.xml).
3. Click [Open].
The le name is displayed in the selection window.
4. Click [Restore].
The setup data is saved on the device.
5. Click the symbol to return to the web menu.
Process Controller Maxxis 5 PR 5900 3 Operation and control
Minebea Intec EN-46