Minebea Intec PR5900 - Remove Application

Select media for update remote terminal
Attached storage devices
USB stick
Network share connections
Alibi
Backups
Exports
ONECLICKUPDATE
Reports
Software
Example: Network share connections [Software], see Chapter 6.9.2.4.
6.9.5 Remove application
In this menu item (under Update software), the existing application is deleted along with
all application-specic settings and database tables.
This is required when developing applications that are to be loaded onto the device with
PR 1750.
Accessible via MENU - [Operating] - [System maintenance]- [Update software]- [Remove
application] .
Update software
Update software
Update via FlashIt!
Update software for remote terminal
Remove application
Restore software from SD card
Remove application
?
Menu item 'Remove application' will
- delete application software,
- remove all application settings,
- remove all tables from database,
- restart the system.
Cancel Continue
1. Select and conrm [Remove application].
A prompt window appears.
2. Press the [Continue] soft key.
Process Controller Maxxis 5 PR 5900 6 System maintenance
Minebea Intec EN-330