Minebea Intec PR5900 - Page 327

6.9.2.4 Shared directory
In this menu item (under Update software), a software version saved in a shared
directory (under Network share connections) is restored.
Note:
The connections with the shared directories are only shown if this has been congured
in the menu [Operating]- [System setup]- [Network share connections] .
Requirements
- The software les must be available in the folder (in this case: [Software]).
Accessible via MENU - [Operating]- [System maintenance]- [Update software]- [Update
software] in this case: [Software] folder.
Select media for update software
Attached storage devices
SD card
SD card (factory data)
USB stick
Network share connections
Alibi
Backups
Exports
ONECLICKUPDATE
Reports
Software
Update software from software
Select binary files to use for update
Software : /
3 binary file(s)
The BIOS and rmware are updated on the device. The application is retained.
The device runs a cold start.
1. In this case: select and conrm [Software].
A selection window opens.
2. In this case: select and conrm [3 binary les].
A selection window opens.
6 System maintenance Process Controller Maxxis 5 PR 5900
EN-325 Minebea Intec