Minebea Intec PR5900 - Export

Restore from Backups @admin
Select items to restore.
Setup data
Calibration data
User management
Application data
Database tables
Start All None
i
Restore completed
Ok
6.3 Export
In this menu item (under System maintenance), the data saved on the device is exported
to a storage medium (e.g. for processing database tables).
- [USB stick], see Chapter 6.3.1.
- Shared directory (Network share connection), see Chapter 6.3.2.
Note:
Only data saved on the device using the [Save] soft key is exported.
Exported data is saved in XML format. These les can then be opened in an editor (e.g.
Windows Notepad) for closer inspection, or to apply an import lter for XML processing
software.
Examples
- Exporting all settings and compiling the host names assigned for the network
settings to generate a list of device names.
- Exporting all calibration data to generate a report for all weighing points in the
system.
- Exporting the database to generate statistics from the REPORT table for the batching
software.
- Exporting the Alibi memory to archive Alibi entries for long-term storage.
Note:
The exported data is stored on the storage medium in the following directory:
/pr5900/hostname/YYYYMMDDHHMMSS/
Where:
Hostname = device name from the network settings
YYYYMMDDHHMMSS = time of the export
Accessible via MENU - [Operating] - [System maintenance]- [Export] .
8. Press the [OK] soft key to return to the [System maintenance] menu.
6 System maintenance Process Controller Maxxis 5 PR 5900
EN-281 Minebea Intec