Minebea Intec PR5900 - Page 282

Restore from Backups @admin
Select items to restore.
Setup data
Calibration data
User management
Application data
Database tables
Start All None
Press the [None] soft key to deselect all selected items.
Note:
If the database tables on the storage medium are not designed for the application
currently on the device, a warning message is displayed, see Chapter 6.2.1.
If necessary, choose a dierent backup directory.
Restore from Backups @admin
Select items to restore.
Setup data
Calibration data
User management
Application data
Database tables
Start All None
?
Press 'Next' to resave
the selection.
Cancel Continue
5. Check the appropriate box ☑ or press the [All] soft key to select all possible items.
6. Press the [Start] soft key to start the process.
A prompt window appears.
7. Press the [Continue] soft key.
The progress windows for the individual items appear and then disappear in
order. An information window is displayed when the process is complete.
Process Controller Maxxis 5 PR 5900 6 System maintenance
Minebea Intec EN-280