Minebea Intec PR5900 - Help Functions; Alibi Memory

- [Restore], see Chapter 6.2.
- [Export], see Chapter 6.3.
- [Import], see Chapter 6.4.
- [Alibi memory maintenance], see Chapter 6.5.
- [SD card maintenance], see Chapter 6.6.
- [Create service report], see Chapter 6.7.
- [Shutdown & Power o] (switch o device), see Chapter 6.8.
- [Update software], see Chapter 6.9.
- [Factory reset], see Chapter 6.10.
- [Test hardware], see Chapter 6.11.
3.5 Help functions
The help function can be accessed from any parameter window using the ? key. A window
appears in which you can scroll up and down through the content using the cursor keys (↑,
↓, ▲, ▼). The window can be closed using the EXIT key.
Note:
The help text is given in English as a default if the corresponding language is
unavailable.
3.6 Alibi memory
The individual functions of the Alibi memory are described in the following menu items:
- In the System setup menu, the conditions for a full Alibi memory are congured
(menu [Operating]- [System setup]- [Alibi memory] ), see Chapter 4.11.
- [Tidy up records], see Chapter 4.11.1.
- [Delete] (complete Alibi memory), see Chapter 4.11.2.
- The Alibi memory is searched in the System information menu (menu [Operating]-
[System information]- [Browse Alibi memory] ), see Chapter 5.6.
- [Search for specic date in Alibi memory], see Chapter 5.6.1.
- [Search for a given sequence number], see Chapter 5.6.2.
- [Status Alibi memory], show status, see Chapter 5.6.3.
- In the System maintenance menu the records of the Alibi memory are exported or
printed and deleted if necessary ([Operating]- [System maintenance]- [Alibi memory
maintenance] ), see Chapter 6.5.
- [Export selection of records], the Alibi memory is exported to a storage medium
in XML format, see Chapter 6.5.1.
- [Export + tidy up selection of records], the Alibi memory is exported to a storage
medium in XML format and then deleted from the device, see Chapter 6.5.2.
- [Print selection of records], the Alibi memory is printed, see Chapter 6.5.3.
Process Controller Maxxis 5 PR 5900 3 Operation and control
Minebea Intec EN-36