Minebea Intec PR5900 - Page 126

Accessible via MENU - [Operating]- [System setup]- [Weighing points]- [Weighing
point x]- [Weighing point]- [Liquid counter] .
Weighing point D @admin
Weighing point not assigned
Save
Weighing point D @admin
Weighing point not assigned
Save
Not assigned
Internal weighing point
Liquid counter
User scale
xBPI scale
SBI scale
Pendeo Truck
Pendeo Process
PR-Net weighing point
Mettler-Scale
SMA scale
4.7.2.1 Parameters
In this menu item, the parameters of the Liquid counter weighing electronics are
congured.
1. Conrm [Weighing point].
A selection window opens.
2. Select and conrm [Liquid counter].
3. Press the [Save] soft key to save the settings.
WP-D Max 1000kg d= 1kg
0
kg
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Internal weighing point
xBPI scale
Liquid counter
Parameters
The weighing electronics are now assigned to the weighing point.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-124