Minebea Intec PR5900 - Page 66

Printer @admin
Interface not assigned
Test print Save
Not assigned
Built-in RS-232
Built-in RS-485
Option-2 RS-485-A
Option-2 RS-485-B
Network printer
Network share connection
USB printer
USB folder
Inactive interfaces are grayed out.
The following printer interfaces are available:
- [Serial printer], see Chapter 4.1.4.1.
- [Network printer], see Chapter 4.1.4.2.
- [Network share connection] (shared directory), see Chapter 4.1.4.3.
- [USB printer], see Chapter 4.1.4.4.
- [USB folder], see Chapter 4.1.4.5.
Note:
The printer dened here is also selected for the conguration printout of the application
at the same time.
4.1.4.1 Serial printer
In this menu item (under Printer), the parameters for a printer at the serial interface are
congured.
Accessible via MENU - [Operating]- [System setup]- [Connected devices]- [Printer]-
[Interface]- [x RS‑x] .
Printer @admin
Interface not assigned
Test print Save
Not assigned
Built-in RS-232
Built-in RS-485
Option-2 RS-485-A
Option-2 RS-485-B
Network printer
Network share connection
USB printer
USB folder
3. Select and conrm the desired interface.
1. In this case: select and conrm [Built-in RS-232].
A selection window opens.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-64