Minebea Intec PR5900 - Backup Operations

System information @admin
Show version
Show status
Show alarm information
Show HW options
Show ModBus-TCP IO module
Browse alibi memory
Show calibration check numbers
Show Pendeo data
Show event log
Print configuration settings
System information @admin
?
Printing configuration settings
Press 'Next’ to print
all configuration settings.
Press 'Cancel' to abort.
Cancel Continue
1. Select and conrm [Print conguration settings].
A prompt window appears.
2. Press the [Continue] soft key.
The conguration is printed out; for an example, see Chapter 10.1.
Process Controller Maxxis 5 PR 5900 5 System information
Minebea Intec EN-262