Note:
If no USB stick is plugged in, a warning appears.
- Plug in a USB stick and wait until the symbol appears in the info line.
- Press the [Retry] soft key.
Backup to USB stick @admin
Select items for backup
Setup data
Calibration data
User management
Application data
Database tables
Start All None
Press the [None] soft key to deselect all selected items.
Backup to USB stick @admin
Select items for backup
Setup data
Calibration data
User management
Application data
Database tables
Start All None
?
Enter a comment for this backup.
Continue Cancel
Backup 2014-03-19
ABC..
Note:
The saved data is stored on the USB stick in the directory "backup":
/pr5900/hostname/YYYYMMDDHHMMSS/
Where:
Hostname = device name from the network settings
YYYYMMDDHHMMSS = time of save
A selection window opens.
2. Check the appropriate box ☑ or press the [All] soft key to select all possible items.
3. Press the [Start] soft key to start the process.
An input window opens.
4. Enter a comment using the keyboard.
Process Controller Maxxis 5 PR 5900 6 System maintenance
Minebea Intec EN-268
To Next Page
Loading...
