Minebea Intec PR5900 - Page 303

[Destination]
Selection: USB stick, shared directory (conguration in menu [Operating]- [System
setup]- [ Network share connections] )
Note:
If no USB stick is plugged in, a warning appears.
- Plug in a USB stick and wait until the symbol appears in the info line.
- Press the [Retry] soft key.
Export + clear alibi records @admin
1
2
3
Select alibi records to export
First sequence number
Last sequence number
1
15
Export Browse
?
Insert a USB flash drive into the
USB port and press 'Next’
to export alibi data records.
Press 'Cancel' to abort.
Cancel Continue
An XML le is saved on the USB stick.
Export + clear alibi records @admin
1
2
3
Select alibi records to export
First sequence number
Last sequence number
1
15
Export Browse
?
Export of alibi data records is complete.
Press 'Delete' to delete the exported data records
from the alibi memory.
Clear Cancel
9. Press the [Export] soft key to start the export.
A prompt window appears.
10. Press the [Continue] soft key.
A progress window is shown during the save process. A prompt window appears
when the process is complete.
11. Press the [Delete] soft key to delete the exported records from the Alibi memory.
An information window is displayed when the process is complete.
6 System maintenance Process Controller Maxxis 5 PR 5900
EN-301 Minebea Intec