Minebea Intec PR5900 - Connected Devices Configuration

WP-A Max 3000kg d= 1kg
831
+
kg
0kg 3000kg
22.08.2012 15:20:46
i
Bios messages
Update Firmware programmed
Update Application programmed
skip Lables
Update Bios already programmed
Ok
These messages are displayed once the device has booted successfully.
Note:
The BIOS messages are always in English, regardless of the selected language settings.
A cold start is carried out if a fatal system error occurs.
WP-A Max 3000kg d= 1kg
831
+
kg
0kg 3000kg
22.08.2012 15:20:46
Fatal system errror
#282 : 2014–09–01–07:18:39–UTC
EXCETION 71($11C): EdgePort7
PC=C0008CE6 FRM=411C SR=2704
D0=00000000 A0=800076AA SP+00=C00278FE
D1=800076AA A1=00000004 SP+04=00071838
D2=80007690 A2=C00322A0 SP+08=00000000
D3=00000062 A3=00000000 SP+12=00000002
D4=00026883 A4=00000001 SP+16=800076F0
D5=000076A8 A5=41790A40 SP+20=C0027A10
D6=00000000 A6=800076F0 SP+24=80000EFE
D7=CF306089 A7=80007670 SP+28=00004552
C0008CD6:4A80 TST.T D0
C0008CD8:6762 BEQ.B $C0008D00
C0008CDA:4200 CLR.B D0
C0008CDC:13C010000000 MOVE.B
D0, $10000000
C0008CE2:4E71 NOP
C0008CE4:4E71 NOP
C0008CE6:4E71 NOP
C0008CE8:4E71 NOP
C0008CEA:4E71 NOP
C0008CEC:4E71 NOP
C0008CEE:4E71 NOP
This message appears on the display after the device has booted.
3 Operation and control Process Controller Maxxis 5 PR 5900
EN-55 Minebea Intec