Mitsubishi GOT1000 Series User Manual

30.3 Preparatory Procedures for Monitoring
30 - 5
25
BAR CODE READER CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL FUNCTION
29
FA TRANSPARENT FUNCTION
30
MULTIPLE-GT11 CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
30.3 Preparatory Procedures for Monitoring
The following shows the procedures to be taken before monitoring and corresponding reference sections.
Connect the MITSUBISHI PLC to the 1st GOT.
Chapter 3 DIRECT CONNECTION TO
CPU
Chapter 4 COMPUTER LINK
CONNECTION
(2nd GOT)
Install the OS onto the GOT.
Section 30.3.1
Installing OS onto GOT
Make sure that the OS is installed on the GOT.
Section 30.3.2
Checking OS installation on GOT
Set the communication interface. (Communication
settings)
Section 30.3.3
Setting communication interface
(Communication settings)
Download the project data.
Section 30.3.4
Downloading project data
Attach the communication unit and connect the cable.
Section 30.3.5
Attaching communication unit and
connecting cable
Make sure that the GOT recognizes the connected
equipment.
Section 30.3.6
Verifying GOT recognizes connected
equipment
Make sure that monitoring is performed normally.
Section 30.3.7
Checking for normal monitoring

Mitsubishi GOT1000 Series Specifications

General

Power Supply	24 VDC
Type	HMI (Human Machine Interface)
Series	GOT1000
Resolution	640 x 480 pixels
Touch Panel Type	Resistive
Interface	RS-232, USB
Storage Temperature	-20 to 60°C
Protection Rating	IP65
Display Type	TFT LCD
Brightness	400 cd/m²
Backlight Life	50, 000 hours
CPU	RISC
Shock Resistance	147 m/s²
Display Size	10.4 inches