8 - 12
8.2 Error Codes and System Alarm List
605 USB device I/F error
The error may be caused by a failure in the GOT.
Contact your local Mitsubishi representative.
606
Multimedia processing unit is not
mounted.
Multimedia unit is installed incorrectly.
Check that the multimedia unit is installed correctly.
*1
607
Video · RGB input object has too
many. Please reduce the number of
settings.
Reduce the number of the video/RGB display objects to be displayed simultaneously.
608
Hierarchical relationship of video ·
RGB input object can not be
represented correctly.
Make sure that multiple video/RGB display objects do not overlap each other.
610 Insufficient memory capacity.
The memory capacity for the MES interface function is insufficient.
Delete unnecessary files, and reserve memory.
611
Improper job files. Confirm job
setting.
The contents for job files are unmatched with the settings for job files.
Check if there are mistakes in the settings on the setting screen.
612
Cannot access Logging Files Check
the memory card
Insert a SD card or USB memory.
Close the SD card cover to make the SD card accessable.
If the SD card or USB memory have unnecessary files, delete the files.
613 Error in writing logfile
Insert a SD card or USB memory.
Close the SD card cover to make the SD card accessable.
Check if the SD card or USB memory is writable.
614 Error in reading logfile
Insert a SD card or USB memory.
Close the SD card cover to make the SD card accessable.
Check if the SD card or USB memory is readable.
615
Cannot connect to MES Server.
Check the Server.
The server does not work normally or the connection path to the server is made up
incorrectly.
Check the operating conditions of the server.
Check the network to the server.
616
Cannot connect to SNTP Server.
Check the Server.
The settings for the SNTP server are wrong or the network to the SNTP server is
made up incorrectly.
Check the operating conditions of the STNP server.
Check the network to the SNTP server.
630 Failed to save a video file.
Check the CF card available area, installation status, cancellation of write-protect,
format status and number of saved files.
631
Failed to save a video file on
network.
Check the activation status of personal computer linkage software in file
server, the setting of Ethernet FTP function of GOT, the network setting of
GOT and file server and the available area of SD card installed in the
GOT main unit.
632
Error detected during multimedia
processing.
Switch off the GOT and check the installation status of multimedia unit, or change the
multimedia unit.
633
The version of the unit software is not
the latest.
Install the latest compatible multimedia unit software using the utility of the GOT.
634
No space remaining in the
multimedia CF card. Terminating
long time recording.
Change the CF card installed on the multimedia unit, or delete unnecessary files.
640
An error occurred in a FTP client
process.
Reconfigure the GOT (FTP client) setting.
Check the operating status and network line of the FTP server.
For the error details, check the GOT special register GS989 (FTP communication
error notification).
➠ GOT2000 Series Gateway Functions Manual for GT Works3 Version1
641
The license key has not been
registered. Confirm your license.
Register the license number for the VNC server function, personal computer
operation function (Ethernet) and MES interface function on the GOT.
650
The operator management
information file is invalid.
Prepare a normal operator management information file and import it ,or store the
operator management information file in a specified location.
651
Cannot access the operator
management information file.
Check if the destination drive that stores the specified operator management
information file is accessible by the GOT.
670
Current alarms exceeded the max
no. that can be procd. at a time.
A hundred or more system alarms have occurred simultaneously.
Eliminate the cause of the output system alarms and check system alarms again.
697
Package writing of the old version is
not allowed.
Install the latest version of GT Designer3, and then perform the operation again.
Error
code
Error message Action
Channel
No. storage
To Next Page
Loading...
Need help?
General
